Imaging of target with complicated motion using ISAR system based on IPHAF-TVA

The technique of imaging a target with a complicated motion using an Inverse Synthetic Aperture Radar (ISAR) system is an effective tool in the field of radar signal processing. After the translational compensation, the received signal reflected from the target can take the form of a multi-component Polynomial Phase Signal (m-PPS), and the high quality ISAR image can be provided via the combination between the estimated parameters of the m-PPS and the Range Instantaneous-Doppler technique (RID). For a target with a high maneuvrability, the occurrence of scatterers Migration Through Resolution Cell (MTRC), caused by the rotational movement could be appearing. That is why the variation in the amplitude of the echo during the time of observation cannot be neglected. The purpose of this study is the parameters estimation of the m-PPS signal with order three in the case of the Time Varying Amplitude (TVA). The Improved-version of the Product High-order Ambiguity Function (IPHAF) with TVA is proposed to improve the quality of the ISAR image compared with traditional techniques based on a constant amplitude; the experimental outcomes confirm that the new IPHAF-TVA method presented in this study is an effective technique to make the ISAR image very clear.     

Effect of scavenge port angles on flow distribution and performance of swirl-loop scavenging in 2-stroke aircraft diesel engine

Swirl-Loop Scavenging (SLS) improves the performance of 2-stroke aircraft diesel engine because the involved swirl may not only benefit the scavenging process, but also facilitate the fuel atomization and combustion. The arrangement of scavenge port angles greatly influences in-cylinder flow distribution and swirl intensity, as well as the performance of the SLS engine. However, the mechanism of the effect and visualization experiment are rarely mentioned in the literature. To further investigate the SLS, Particle Image Velocimetry (PIV) experiment and Computational Fluid Dynamics (CFD) simulation are adopted to obtain its swirl distribution characteristics, and the effect of port angles on scavenging performance is discussed based on engine fired cycle simulation. The results illustrate that Reynolds Stress Turbulence model is accurate enough for in-cylinder flow simulation. Tangential and axial velocity distribution of the flow, as well as the scavenging performance, are mainly determined by geometric scavenge port angles α_geom and β_geom. For reinforcement of scavenging on cross-sections and meridian planes, α_geom value of 27° and β_geom value of 60° are preferred, under which the scavenging efficiency reaches as high as 73.7%. Excessive swirl intensity has a negative effect on SLS performance, which should be controlled to a proper extent.     

利用定标站对旋转扫描扇形波束散射计的信号频率估计

该文基于中法海洋卫星(Chinese-French Oceanic Satellite,CFOSAT)雷达散射计系统参数,给出了可行的在轨Doppler预补偿方法并利用地面定标站实现对RFSCAT信号频率的估计.对比了3种信号频率估计方法,通过仿真分析表明,可达到优于0.05kHz的频率估计精度.仿真结果表明,通过把估计的频率与Doppler预补偿查找表和Doppler频率进行比较,可实现对RFSCAT在轨Doppler预补偿状态及生命周期内的载频漂移监测.     

采用阵列天线的GPS接收机的多径抑制方法

提出一种新的用于阵列天线GPS接收机的多径抑制方法。考虑到通常GPS视线信号的来波方向与多径的来波方向不同,在每个导航数据符号位内测距（C/A）码重复,通过对阵列接收的信号矢量与它本身的延迟信号矢量互相关,提高接收机前端信噪比,再利用最大特征值法和前后向空间平滑技术准确地估计期望卫星视线信号（LOSS）的来波方向。最后综合多个GSC子阵列有效地降低了相关多径对码跟踪精度的影响。仿真结果显示,该方法能使接收机在与LOSS码同步前准确估计LOSS的角度信息,有效抑制相关多径,且鉴相结果准确。     

弱撞击对接机构捕获系统运动空间研究

以弱撞击对接机构（LIDM）捕获系统的运动空间为研究对象,提出了影响运动空间的主要因素如驱动臂长度、转动副转角、结构框内径等对运动空间的限制。在此基础上,对捕获系统运动空间及其各截面进行了分析,并详细讨论了结构框内径对运动空间的影响,对LIDM的设计和优化具有重要意义。     

航天器自主交会对接的高精度目标定位方法

根据航天器自主式交会对接的实际应用背景和技术需求,针对交会对接过程中所要求的高精度、实时性和强抗扰的技术指标,在合作目标特性分析的基础上,将高斯曲面拟合与双线性插值相结合,提出了一种高精度的合作目标定位方法。首先根据目标图像的灰度分布进行双线性插值和高斯曲面拟合,在此过程中可同时利用目标原有像素和插值点的亚像素信息,使拟合曲面各幅值点的坐标精度达到亚像素级,以确定目标的中心位置。仿真图像和实拍图像的试验结果表明,此定位方法具有亚像素级的定位精度,其总体定位误差可达到1/20个像素左右,并能满足实时性要求,可以在航天器交会对接与空间遥操作等方面的应用中发挥重要作用。     

深空测控通信中GMSK体制非相干解调算法研究

针对深空测控通信中GMSK体制非相干解调损失较大的难点,提出了一种改进的GMSK信号非相干维特比解调算法。通过分析相位状态网格图中相位转移规律,建立理论仿真模型。通过原理样机的研制和测试,实测数据表明：该算法具有解调损失低、实现复杂度适中的优点;相比于理论的最佳相干解调算法,在误码率1×10 -4 量级下,实测仅损失0.6 dB。目前该算法已应用于国内某深空测控通信系统GMSK体制基带设备中,并成功解调出欧空局Herschel–Planck卫星数据。     

高硅氧纤维增强苯并噁嗪树脂复合材料的制备及性能

以苯并噁嗪为基体树脂,短切高硅氧纤维为增强材料,制备了一种模压用复合材料。研究了该树脂的热性能、固化动力学性能及力学性能。结果表明,苯并噁嗪增强高硅氧纤维混合物随固化温度升高工艺窗口未发生显著变化,利用Kissinger、Crane法得到固化反应活化能为69.619 kJ/mol,反应级数为0.95。复合材料拉伸强度为35.5 MPa,,压缩强度为196 MPa,线烧蚀率为0.14 mm /s.     

含硼富燃燃气燃烧实验研究

为实现固冲发动机二次燃烧模型验证,结合固冲发动机工作条件,设计了一种带透明观察窗燃烧实验装置;营造了简单的燃烧环境,实现了燃烧过程掺混作用的弱化;借助高速摄像进行了以空气速度作为单一变量的含硼富燃燃气燃烧可视化测量,获得了火焰形态结构;采用高速数据采集,获得了燃烧室压力;将实验数据与数值模拟结果进行了对比和分析。结果表明,燃气与空气速度相近时,火焰呈锥角结构,硼粒子的点火距离较长;燃气与空气速度差较小时,同一位置燃烧室压力较大;燃气与空气速度近似程度决定火焰的形态;数值模拟结果与实验结果基本吻合。     

一种基于空间相机热特性的高精度控温方法

为提高空间相机的控温精度以保证成像品质,文章提出了一种基于空间相机热特性的高精度控温方法。该方法从相机控温回路所控区域的能量平衡方程出发,根据控温区域自身的热特性参数,综合考虑其它控温区域对其传热影响以及外热流变化等因素,最终确定本控温周期内的主动控温功耗或加热占空比。通过建立某相机热模型,分别施加上述控温方法与开关比例控制算法,对控温效果进行了仿真对比。结果表明,该方法的控温精度显著优于常用的开关比例控制。